(
Pressure
Tanks
We offer a range of pressure tanks with the PED european directive 2014/68/EU (ex PED 97/23/EC) Offering from 300L to 20,000L in size.
Range -
Diathermic oil storage tanks
The tank acts as a collector of diathermic oil and temporarily stores the fluid when the system is undergoing maintenance.
In addition, the volume of the pressure tank guarantees compensation for the heat transfer fluid’s thermal expansion when the heat generator is operating or switched off.Compressed air tanks -
The AC standard pressure tanks store compressed air to make it available at peak moments of consumption in an air system.
In this way, the need for the compressor to start-up is drastically reduced thereby increasing its life and efficiency.
In addition, an optimum distribution of air is guaranteed thanks to the constant air pressure within the tank.
In this way, the need for the compressor to start-up is drastically reduced thereby increasing its life and efficiency.
In addition, an optimum distribution of air is guaranteed thanks to the constant air pressure within the tank.
Inertial steam tanks -
The inertial steam storage tanks are used to support industrial steam generators with a "lung" function, storing pressurised steam in liquid form.
The stored steam is reused to manage peak moments of consumption and to deal with the generator’s start-up and switch off cycles
The stored steam is reused to manage peak moments of consumption and to deal with the generator’s start-up and switch off cycles
Steam distribution -
When it is essential to distribute steam along various usage lines in a system, equalisation manifolds have to be installed too..
The manifolds receive the steam stored in a liquid form in the buffer tank, they vaporise it and distribute it along the system, making it available in the various lines.
constructing distribution manifolds to order, as the rules for selecting, the geometry, the materials and the treatments are the same as steam storage tanks.
The manifolds receive the steam stored in a liquid form in the buffer tank, they vaporise it and distribute it along the system, making it available in the various lines.
constructing distribution manifolds to order, as the rules for selecting, the geometry, the materials and the treatments are the same as steam storage tanks.